How to Share PDF or eBook Passages On Kindle Fire

In order to share passages PDF or eBook passages on Kindle Fire, perform the following steps:

Step 1. The first thing that you need to do is to select the passage to share. You can select the passage by long-pressing on that part of the text.

Step 2. This will highlight the text and would place brackets at the beginning and end of the highlighted text.
Step 3. Now drag the beginning and ending brackets to adjust your selection.
Step 4. Once you have selected exactly what you want to share, tap on the share button that is displayed just above the selected text.
Step 5. In addition to sharing the passage, you can also leave a note for yourself or keep the section highlighted so that you can reference it later.
Step 6. The sharing page will appear once you have tapped on the sharing button.

Step 7. From the sharing page, you can select on which social networks you would want to share the passage.
Once you have tapped the orange button the passage would be shared with the Amazon community.

How to enable Find my iPhone

Before you can use Find my iPhone (or iPod or iPad), you need to turn it on.

Step 1. Launch the Settings app.

Step 2. Tap on iCloud.
Step 3. Toggle Find my iPhone to On

How to use Find my iPhone to locate your iPhone

Step 1. Go to www.icloud.com.
Step 2. Log into your iCloud account.
Step 3. Click on Find my iPhone.

Step 4. If you have multiple devices just choose the one you want to follow.

Step 5. Click on the Information icon on the map and you can see your options.

Step 6. Choose your option — Play Sound or Send Message, Remote Lock, or Remote Wipe.
And now you can see your iPhone on the map which is a small green dot

Registry Editor is an advanced tool for viewing and changing settings in your system registry, which contains information about how your computer runs. And backing up Windows registry is always a good practice before making any changes to the Windows Registry as its health is crucial for the proper functioning of Windows. This guide will show you how to back up and restore your registry in this guide.

Backing up Windows Registry

Step 1: Open the run dialog box, type “regedit” and press enter you will see the Registry Editor for Windows.

Step 2: Now just right click on Computer and select Export option.

Step 3: Type the name of the backupfile and save it on your hard disk.

Restoring the Registry

Restoring a Registry is very easy, just double-click the file created in the backup process to open it with the Registry editor. When Windows asks you to confirm your actions, press the Yes button.

Note: If at all the Registry file is associated to a different program, right-click on the file and select Open With… Registry Editor.

Step 1: Initiate the Local Group Policy Editor (Win Key + R simultaneously).

Step 2: In the Run box, type in gpedit.msc and then tap Enter.

Step 3:When the Group Policy window appears, navigate to Computer Configuration -> Administrative Templates -> Control Panel -> Personalization. You can access this location from the main window or from the left hierarchy.

Step 4:On the right-hand side, you will need to double click on the “Do not display the lock screen” setting.

Step 5: By default, this option is set to Not Configured. To disable the lock screen, we need to set it to Enable. And Click on Apply

And the next time you turn on the computer, you will be greeted with the log in screen instead of the lock screen.

How to set up Find my Friends on your iPhone, iPod touch, and iPad

Like Find my iPhone, Find my Friends is a free from Apple and available on the App Store.

Download now

Once Find my Friends is installed, it’s easy to use.

Step 1: Launch Find my Friends

Step 2:Login with your Apple ID

Step 3:Agree to Push Notifications and Location Sharing (Find my Friends is not much good without them).

How to add friends to Find my Friends

Before you can use Find my Friends on your iPhone, iPod touch, or iPad, you need to add some friends.

Step 1:Launch Find my Friends.

Step 2:Tap the + button to add friends.
Step 3:Enter the email addresses of friends you want to add and each will be sent a message

Once a friend accepts your invitation, you can always see where they are and vice versa

How to add temporary friends to Find my Friends

If you only want to share your location with a friends for a limited time, use the Temporary option

Step 1:Launch Find my Friends

Step 2:Tap on the Temporary tab at the bottom.
Step 3:Choose how long you want to share your location for in hours, days, or weeks

Follow below guide to install it, first note that device battery should be charged. Please make a backup of your device data such as SMS, internet setting, contacts music files etc because the below procedure may wipe data, you can use file expert app to backup. Bear in mind that this ROM is just for Samsung Galaxy Note model number GT-N7000, you can check the version from Setting>About Phone. Your device must running Ice Cream Sandwich firmware and should be rooted with ClockworkMod recovery installed on device.

DISCLAIMER: Please proceed the below guide at your own risk, Android Egis will not be held responsible if your device lost data or get damaged following this guide.

Instructions

Step #1: Download the ROM from here or here to PC.

Step #2: Plug the device to PC using USB cable.

Step #3: Transfer the downloaded file to internal SD card of device.

Step #4: Disconnect the device from PC.

Step #5: Turn the device off.

Step #6: Reboot the device into recovery mode by holding down the Volume Up and OK buttons as you press the Power button.

Step #7: In recovery mode, create a nandroid backup of your current ROM, it’s important because if anything not work out that you expect from this ROM, you’ll be able to easily revert back to your current state. To create backup select “Backup and Restore”, and then select “Backup” again.

Step #8: Perform Wipe, first select “Wipe Data/Factory Reset”, then Select “Wipe Cache”.

Step #9: Select “Install Zip from SD Card” then “Choose Zip from SD Card” and locate the downloaded file that you’ve transferred in above step and confirm installation. Wait till installation complete.

Step #10: Once the installation is completed, select “Go Back” after that select “Reboot System Now.” That’s it you’re done, if you get stuck in a boot loop, you just hold down the Power button for 10 seconds. Enjoy!

The news has come and gone, everybody now knows that Facebook has acquired Instagram- the popular mobile phone only photo sharing application that was developed last year by a great guy, Kevin Systrom and his best programming friend. Instagram is refers to as a mobile phone sharing app that lets its users to share photos with their friends and families with ease. The app allows people to send photo from one mobile PC to another without the stress of verifying the status of the transfer or the other.

Downloading Instagram Photos to Computer

Step 1: Visit Instaport homepage and sign in with your Instagram account. While signing in, Instagram will ask you to confirm Instaport.me request to access your data. Just click on the yes button.

Step 2: Now select the option, Download .zip file and select Start Export button to download all your photos from Instagram. If you want to download only selected photos, expand Advanced Options and select your desired settings.

Step 3: Instaport will then start processing your request. It may take some time before Instaport provides you the download link. Refresh the page after some time to see if the download link is generated. If the link is generated just click on it to download all the photos in the zip format. If not, refresh the page again after some time.

Now extract the zip to a folder and enjoy all your Instagram photos directly on your computer without connecting to the internet.

So do take the backup of your Instagram photos time to time and secure all those beautiful moments for a lifetime.

One annoyance you may not like about Windows is when it highlights newly installed programs which is enabled by default in XP, Vista, and Windows 7. Today we will take a look at disabling it through the taskbar properties and through the registry.

Here we look at an example of the annoyance, notice the tacky highlight over programs that were recently installed.

Disable highlighting new programs through Start menu properties

1. Right-click on the Windows 7′s taskbar and choose Properties.

2. In the Taskbar and Start menu Properties window, switch to the Start Menu tab and click Customize.

3. In the new pop up window, scroll down and find the Highlight newly installed programs option. By unchecking this option, new programs will not be highlighted in the Start menu anymore.

4. Click OK to save the setting.

Disable highlighting new programs through Registry:

1. Press  Win key + R to open the Run box. Type in regedit and hit Enter.

2. In the Registry Editor window, go to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced

3. On the right-side pane, find the Start_NotifyNewApps DWORD value. If you can not find it, you can create one easily (right-click on an empty space -> New -> DWORD (32-bit) Value, and then name it Start_NotifyNewApps).

4. Double click on the DWORD value and change its value data from 1 (enable highlighting new programs) to 0 (disable highlighting new programs). Click OK to save.

5. Close the Registry Editor window.

6. Restart your computer to see the changes in the Start menu.

The popular online photo editor Picnik has been purchased by Google and will no longer be available to users without a Google+ account. However, some of the Picnik team members have created PicMonkey, a new, free photo editor.

After you drag a photo into PicMonkey.com, the image editor opens with your image on the right and the tools on the right. There are basic adjustments, like cropping, rotating and sharpening tools, as well as a huge selection of frames and textures. If you like touching up your photos you’ll find a number of options to make your face look even more beautiful, like Blemish Fix and Spray Tan. You can also add text and shapes onto your images too. However, we’re most excited about all of the awesome filters, like Warhol, Lomo, HDR, Sepia and Cross Process, which can all be adjusted and customised.

Altered photos can be saved as jpgs or pngs. Note that PicMonkey runs on Flash, so it won’t work on the iPad.

Lastly, some of the editing tools are dubbed “Royale effects.” When you use such an effect, a monkey logo shows up on the image you’re editing. It doesn’t stay on your image when you save it, but just shows up in the editor to remind you that you ventured out of the free tools. Royale effects are free to use at the moment, but a subscription service is forthcoming. Collages and other tools are also forthcoming.

Chrome for Android recently updated, giving a lot of new features. Today we are going to take a look at the ability to add a bookmark shortcut to your home screen. This video below will guide you how add a bookmark shortcut to your home screen.